Among the 4G LTE routers and mobile requirement, Netgear offers a new device that meets both mobility and a fixed 4G solution, while supports LTE category 11. In category 11, the maximum theoretical downflow could reach 600 Mbit/s. The AirCard 810 manages the 3-band aggregate to achieve these flow rates.
Interestingly, the 2.4-inch color LCD screen is tactile and allows operation in menus, avoiding the use of a PC or a smartphone to change the settings. There are dual external antenna connectors in TS9 format, perfect for increasing wireless signal in the countryside.
The design is very classic, with removable battery, a mains charger equipped with an adapter “English”. A USB cable allows the device to be charged, while another USB cable (too short) allows it to charge a smartphone from the Hotspot battery.
The removable lithium-ion battery of 2930 mAh, allows continuous operation time about ten hours depending on the use and up to 250 hours standby time. You will find in the functionality of this MiFi router in the web interface, including the network settings, port transfer, DMZ, parental control, QOS etc.
The DC112A cradle allows the AirCard 810 hotspot (and other models) to be connected, but it’s not just a docking station.
The DC112A station provides few additional functions than predecessor model DC113A. In practice, the DC112A is a real Internet WAN router with all the functions expected on a router, but it hosts the AirCard 810 hotspot via a USB 3.0 connection, to truly mate it to its functions.
The DC112A station is equipped with a Gigabit WAN and 4 gigabit LAN ports connection to connect to your Access Point or Boxing as well. It is a router that offers all the usual functionalities (IP V6, DMZ, QOS, port forwarding, DHCP …) and offers WiFi functions 802.11 ac on 2.4 and 5 Ghz, as well as a front USB 3.0 connector allowing sharing of Data, including the Internet.
Connectivity is important, the cradle is equipped with 2 large WiFi antennas (SMA format).Two WAN 4G/3G antennas are present inside the unit, allowing greater range and reception for the AC810. The latter can also be replaced by external antennas, since the station also has 2 TS9 sockets for connecting a 4G/3G external antenna with dual connectors.
Once the AC810 hotspot is connected to the station, Netgear offers us an operation of the 2 devices “on demand” and offers a configuration between the WAN connection and the 4G data connection.
If you like the Netgear Aircard 810s, welcome to click here: http://www.4gltemall.com/netgear-aircard-ac810s-4g-lte-cat11-mobile-hotspot.html